Riporto la risposta alla mia richiesta di informazioni alla Cardo a beneficio di tutti:
Thank you for contacting the Cardo Systems Support Center regarding our products.
Please delete all Bluetooth pairing and turn all devices off for at least 15 seconds. You may also want to reset the Garmin as well. Then attempt the pairing again. First pair the Scala Rider Q2 and GPS, then the Phone to the GPS and then try shutting the Zumo off and back on.
Turning the Scala Rider Q2 off before you start the Zumo again would be a good idea as well.
To pair one Q2 with your Garmin ZUMO
1. Delete the mobile phone pairing to the Zumo
2. Pair between the Q2 and the Zumo
a. Make sure the Q2 is powered on.
b. Press and hold the control button until the headset flashes Red and Blue.
c. Now search for a Bluetooth enabled headset from the Phone or GPS system you are pairing the Q2 with.
d. After your device finds the Q2 you will be prompted to enter a passkey. The passkey for the Q2 is (0000).
3. Now test the GPS functionality with Q2. If it works fine then:
a. Pair between the Zumo and the mobile phone
b. You can pair between the other Q2 to mobile phone
Please feel free to contact us if we can assist with any other questions.
|